Wednesday, January 26, 2022

,
HR i4 Pro 5G WIFI 2KM FPV with 4K HD EIS Camera 3-Axis Gimbal 25mins Flight Time Brushless Foldable RC Drone Quadcopter RTF
COD
HR i4 Pro 5G WIFI 2KM FPV with 4K HD EIS Camera 3-Axis Gimbal 25mins Flight Time Brushless Foldable RC Drone Quadcopter RTF
COD HR i4 Pro 5G WIFI 2KM FPV with 4K HD EIS Camera 3-Axis Gimbal 25mins Flight Time Brushless Foldable RC Drone Quadcopter RTF
CODHR i4 Pro 5G WIFI 2KM FPV with 4K HD EIS Camera 3-Axis Gimbal 25mins Flight Time Brushless Foldable RC Drone Quadcopter RTF
COD



HR i4 Pro 5G WIFI 2KM FPV with 4K HD EIS Camera 3-Axis Gimbal 25mins Flight Time Brushless Foldable RC Drone Quadcopter RTF


Description:


Drone

Remote control: 2.4ghz folding remote control (with stand)
Remote control distance: 3000 meters (no interference, no shelter)
Remote control battery: Rechargeable lithium battery (built-in)
Battery: 7.6V 3000mAh
Charging mode: USB charging, battery built-in balance charging
Charging time: about 180 minutes
Flight time: about 25 minutes
Motor specifications: 1805 brushless motor
GPS: Dual mode (GPS/GLONASS)
Camera
Lens pixel: 4K
Real-time image transmission pixel: 1080P/20fps
Photo resolution: 4096* 3072P
Video resolution: 1920*1080p
SD card is not supported. Video and image are saved on the phone
3-Axis Gimbal
Head Angle longitudinal: about 90° automatic repair
Side Angle: about 110° automatic repair
Side Angle: about 70° automatic repair
Adjustable lens Angle: about 90° longitudinal adjustable
Transmission distance: 2000 meters (no interference, no shelter)
Size
Product size: 22.5*18*5cm
Folding size: 15*6.5*8cm
Packing size: 28.5*8.5*21cm
Weight: 332g
Battery weight: 80.6g


Features:

Positioning function:
1. Optical flow positioning: in indoor mode, adjust flight through the image recognized by the bottom lens to achieve fixed-point hovering effect (certain environmental requirements)
2.GPS positioning: real-time display of the altitude, distance, longitude and latitude of the current aircraft from the point of return through GPS signals

Three axis Gimbal function:
1. Three-axis GimBAL: It can control the longitudinal shooting Angle of the camera through remote control or APP during flight
2. Electrically adjusted camera: The longitudinal shooting Angle of the camera can be controlled by remote control or APP during flight
3. Lens switching: The front lens and bottom lens of the UAV can be switched freely during flight
4. Gesture photography/video recording: make the corresponding gesture in front of the camera to trigger the automatic photography/video function of the aircraft

Drone flight functions:
1. Point flight: in GPS mode, the aircraft will fly according to the position selected on the map
2. Trajectory flight: In indoor mode, the aircraft will fly according to the planned route
3. Master tracking: Click master tracking and select the target in indoor mode, and the aircraft will fly with the target character
4. Palm control: Click the palm control in indoor mode, and the aircraft will fly up and down with the palm after identifying the target
5.GPS Follow: Click GPS follow in GPS mode, and the aircraft will follow the phone to fly
6. Surround flight: in GPS mode, the aircraft will surround with the current position as the center of the circle, and the position of the aircraft can be adjusted during the process

Drone anti-loss function:
1. One key return: If this function is enabled in GPS mode, the aircraft will automatically return and land at the takeoff position
2. Low power return: The aircraft will automatically identify the position and the power required for return. If the power is too low, it will automatically return and land at the take-off position
3. Runaway return: After the aircraft is disconnected from the control terminal (mobile APP, remote control) for 3 seconds, the aircraft will automatically return and land at the takeoff position


Package Included:

1 x Drone
1 x Battery
1 x Remote control
8 x Spare blade
1 x USB fast charge charging cable

1 x User Manual






HR i4 Pro 5G WIFI 2KM FPV with 4K HD EIS Camera 3-Axis Gimbal 25mins Flight Time Brushless Foldable RC Drone Quadcopter RTF CODDownload NowView Gallery


Tuesday, January 25, 2022

,
30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone
COD
30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone
COD 30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone
COD30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone
COD



Description:
The Holybro FETtec FC G4 features the latest STM32 G4 MCU with math accelerator for the ultimate in-flight performance, onboard OSD for KISS flight tuning, 2 dedicated BECs for 5V and 16V switchable power, DSHOT2400 outputs for support of up to 8 motors, and dual 20×20 and 30×30 mounting holes.

Note:
Currently, the Holybro Fettec FC G4 does not support BLHeli_32 ESC Configuration via FC Passthrough and BLHeli_32 ESC telemetry/current reading. An Betaflight Flight Controller is needed to configure BLHeli32 ESC Setting.

Specification
Latest STM32G4 Processor
     170Mhz + Math accelerator
     MPU6000
Supply voltage 6-27V (2S-6S Lipo)
2x dedicated onboard BEC (max. 600mA each)
     5V BEC for RX
     5V/16V BEC for VTX (switchable and real Pit*)
2x 8 pin connector for solder free ESC connection
     Connector 1: ESC signal 1-4, telemetry, VCC, GND
     Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
     real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
2x 6 pin connectors for serials
     RX1, TX1, 3.3V, VCC, 5V, GND
     RX3, VCS/TX3, RGB LED, VCC, 5V, GND
1x 4 pin connector for receiver
     Signal, TLM, 5V, GND
5 UART serials
     UART 1 free
     UART 2 used for Receiver
     UART 3 free
     UART 4 used for onboard OSD, can be set free
     UART 5 used for ESCs / TLM / Onewire
4 ESC solder pads (Signal/GND) in each corner
Buzzer pads
4 tiny RGB LEDs (selectable color)
Supported ESC protocols
     PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
FETtec KISS firmware
Onboard OSD
     Graphic OSD (STM32)
     Full KISS Tuning
     Filter (PIDs, Rates, Settings)
     LED control (RGB LED, Racewire)
     VTX
     Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
     KISS GPS support + live map
     Custom graphic pilot logo
     Stick overlay
     Custom layout
     can be deactivated for usage of digital systems

65A ESC
Continuous Current: 65A x4
Burst Current: 75A x4
Supports 4-6S battery
Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
ESC telemetry Supported
Onboard analog current sensor
No output BEC
BLHeli_32 firmware
1000uf 35v capacitor included (highly recommended for 6s setup)
Amperage meter scale ratio: 168
Dimensions: 43 x 44mm / Weight: 15.8g
Mounting holes: M4 30.5×30.5mm (M3 grommets included)

Features:
New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM output up to 96K (default 48K)
Metal-cased MOSFET for excellent heat dissipation
Massive on-board capacitance for noise filtering at 2068uf
3 oz copper PCB design to allow bigger current and better heat dissipation
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Manual:


Package included:
1x FETTEC FC G4 STACK
1x Electrolytic capacitor: 1000uF 35v
1x JST SH1.0 8pin to 8pin 25mm cable
1x JST SH1.0 8pin to 8pin 65mm cable
1x JST SH1.0 8pin 100mm cable
1x JST SH1.0 6pin 100mm cab




30.5*30.5mm Holybro FETTEC FC-G4 Stack Tekko32 F4 4in1 4-6S 65A BLHeli_32 ESC for RC FPV Racing Drone CODDownload NowView Gallery


Monday, January 24, 2022

,
Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter
COD
Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter
CODPropeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter
CODPropeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter
COD



Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter


Description:

Item Name: Props Guard

Material: ABS

Color: Grey

Size: 95x29mm

Net Weight: 33g

Usage: for Hubsan Zino MINI SE / PRO RC Drone Quadcopter


Features:

- Isolation of blades to ensure flight safety.

- Lightweight and compact, easy to assemble and disassemble.

- Design for Hubsan Zino MINI SE / PRO RC Drone.


Note:

NOT Included the Drones.


Package Included:

2 x Props Guard





Propeller Props Guard Protection Cover for Hubsan Zino MINI SE PRO RC Drone Quadcopter CODSee detail


Sunday, January 23, 2022

,
URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone
COD
URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone
COD URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone
CODURUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone
COD



URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone

Description:

Brand: URUAV
Name: 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery
Capacity: 3200mAh
Weight: Approx 156.2g
Size: 70*36*36mm
Plug: XT60
Color: As Shown
Note: Due to the difference between the measurement, the battery dimension and weight may have little error.
 
Caution:

Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
 
Package Included:

1x URUAV 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery




URUAV VTC6 11.1V 3200mAh 15/30C 3S Long Range Li-ion Battery XT60 Plug for FPV Racing Drone CODDownload NowView Gallery


Thursday, January 20, 2022

,
HBX 903 1/12 RC Car Spare Tires Wheels Rims 90115 Front Rear Universal Vehicles Model Parts
COD
HBX 903 1/12 RC Car Spare Tires Wheels Rims 90115 Front Rear Universal Vehicles Model Parts
COD HBX 903 1/12 RC Car Spare Tires Wheels Rims 90115 Front Rear Universal Vehicles Model Parts
CODHBX 903 1/12 RC Car Spare Tires Wheels Rims 90115 Front Rear Universal Vehicles Model Parts
COD



Description:
Item Brand:HBX

Item Name:90115
Item Name:Tires Wheels Rims
Material:Rubber and plastic
Color:Black

Product Size:About 9.7*4.7cm,wheel hex is 12mm
Product Weight:About 144g
Fit For:HBX 903 1/12 rc car vehicle model

Package included:
2 X Tires Wheels Rims





HBX 903 1/12 RC Car Spare Tires Wheels Rims 90115 Front Rear Universal Vehicles Model Parts CODDownload NowView Gallery


Follow Us @soratemplates