Saturday, December 4, 2021

,
KF KF105 GPS 5G WiFi FPV with 4K HD ESC Dual Camera Visual Obstacle Avoidance Brushless Foldable RC Drone Quadcopter RTF
COD
KF KF105 GPS 5G WiFi FPV with 4K HD ESC Dual Camera Visual Obstacle Avoidance Brushless Foldable RC Drone Quadcopter RTF
COD KF KF105 GPS 5G WiFi FPV with 4K HD ESC Dual Camera Visual Obstacle Avoidance Brushless Foldable RC Drone Quadcopter RTF
CODKF KF105 GPS 5G WiFi FPV with 4K HD ESC Dual Camera Visual Obstacle Avoidance Brushless Foldable RC Drone Quadcopter RTF
COD



KF KF105 GPS 5G WiFi FPV with 4K HD ESC Dual Camera Visual Obstacle Avoidance Brushless Foldable RC Drone Quadcopter RTF


Specification:

Brand Name: KF

Item NO: KF105

Color: Black

Motor: Brushless Motor

Quadcopter Battery: 7.4V 2200mAH LiPo Battery

Flying Time: About 22 minutes

Charging Time: About 5 hours

Remote Control Distance: Approx. 500M (no interference)

FPV: 5G WiFi

Image Transmission Distance: Approx. 300M (no interference)

Camera Resolution: 4K (Adjustable camera by transmitter, 90°)

Obstacle Avoidance System: Visual Obstacle Avoidance

Maximum Wind Resistance: Level 4

Quadcopter Size: 145 x 80 x 60mm (Foldable)

                            270 x 260 x 60mm (Unfoldable)

Storage Bag Size: 260 x 185 x 85mm


Features:

- Folding arm, small size, easy to carry.

- Built-in 4K HD dual wide angle camera give wide range high denfinition pictures and video.

- With 5G wifi function can be connected APP, APK system to take pictures, video, real-time transmission through the phone camera image.

- GPS accurate positioning + Optical Flow hovering.

- With 2200mAh large capacity battery, the flying time up to 22mins.

- Draw a flight path on the screen, the drone will fly autonomously along the specified path.

- Way-point Flight: Plan your flying route by drawing the dots on the built-in map on the App, recording beautiful scenery along the route. Besides, the GPS mode will give you the exact positioning details of the drone.

- Point of Interest: Select a building or location and click it on the map of App. The drone could continue to fly clockwise around this specific building or location, presenting a comprehensive image.

- Return to Home: It will always returns automatically whenever Battery is low, Signal is lost or You press one key return.

- 2.4GHz anti-interference technology.

- 4 channels for ascent, descent, forward, backward, left flight, right flight and 360°roll.

- Six-axis gyroscope, smoother flight and more convenient control.

- LED lights make flying more spectacular, especially in the dark.


Function: up / down, front / back, left / right turn, lateral flight, three-level flight speed, LED light, GPS positioning, around flight, waypoint flight, altitude hold mode, headless mode, one key return, one key take off and landing, WiFi FPV, camera / video, Visual Obstacle Avoidance


Package Included:

1 x KF105 RC Quadcopter

1 x Remote Controller

1 x 7.4V 2200mAh Battery

1 x USB Charging Cable

4 x Spare Blade

1 x Screwdriver

8 x Screw

1 x User Manual

1 x Storage Bag






KF KF105 GPS 5G WiFi FPV with 4K HD ESC Dual Camera Visual Obstacle Avoidance Brushless Foldable RC Drone Quadcopter RTF CODDownload NowView Gallery


Friday, December 3, 2021

,
EMAX E8 2.4GHz 8CH Dual-frequency Left Right Switch Mode2 Radio Transmitter Built-in USB Charge Wired Trainer Interface for EMAX Tinyhawk III RC Drone
COD
EMAX E8 2.4GHz 8CH Dual-frequency Left Right Switch Mode2 Radio Transmitter Built-in USB Charge Wired Trainer Interface for EMAX Tinyhawk III RC Drone
COD EMAX E8 2.4GHz 8CH Dual-frequency Left Right Switch Mode2 Radio Transmitter Built-in USB Charge Wired Trainer Interface for EMAX Tinyhawk III RC Drone
CODEMAX E8 2.4GHz 8CH Dual-frequency Left Right Switch Mode2 Radio Transmitter Built-in USB Charge Wired Trainer Interface for EMAX Tinyhawk III RC Drone
COD



EMAX E8 2.4GHz 8CH Dual-frequency Left Right Switch Mode2 Radio Transmitter Built-in USB Charge Wired Trainer Interface for EMAX Tinyhawk III RC Drone


OVERVIEW:

E8 Transmitter is a new wireless controller released by EMAX.It has a built-in 2.4GHz dual-bandantenna and 2.4GHz RF module.The RF module supports 8 channels.The channel range is configurable and compatible with most receivers on the market.It is equipped with a wired trainer interface and simulation.The Mode of the device can switch between left and right hand modes,and the ergonomic design can bring a good user experience paired to gether with a built in battery which can be charged via USB.


Specification: (Manual)

Brand Name: EMAX

Item Name: E8 Radio Transmitter

Model: E8

Weight: 260g (without battery)

Size: L*W*H=150x140x45mm

Working voltage: 3.7V-4.2V

Channel: 8 channels, all channels can be configured

External interface: Micro USB interface, 3.5mm audio interface (wired trainer interface)

Transmitting module: built-in 2.4GHz dual-frequency FPC antenna, 2.4GHz RF transmitting module

Working frequency band: 2.4GHz (2400MHz-2483.5MHz) 

Maximum output power: 22dbm

Charging system: Built-in USB 5V--1A linear lithium-ion battery charging system


Mode switching:

D8 mode: press the power switch and the "L1+" button at the same time: turn on and enter

D8 mode, then the mode indicator will turn solid red.

D16 mode: press the power switch and the "L2-" button at the same time: turn on and

enter D16 mode, then the mode indicator light will turn solid green.

D16 LBT mode: Press the power switch and the "L4+" button at the same time: Turn on the

controller and enter D16 LBT mode, then the mode indicator light will turn solid yellow


Battery & Charging:

The E8 Transmitter is compatible with a 18650 battery, with a working voltage of 4.3V-3.3V.

When you need to reinstall the battery, remove the battery compartment cover and install the battery according to the correct polarity (the negative pole is on the spring side of the battery compartment). Confirm that the battery compartment cover and the battery compartment are perfectly matched then push forward until locked. If the battery is not installed correctly, charging and starting cannot be performed correctly.

The remote control is charged with the micro USB at the bottom. 


Charging system and battery installation instructions:

Power charging indicator status:

When Red LED is solid: charging is in progress.

When Green LED is solid: charging is finished.

Note: Use a 5V-1A adapter to charge. When the voltage is low, it will alarm. Please recharge when low.


Gimbal Trim:

Each joystick has a corresponding Trim button. Each Trim button adjusts the direction of the corresponding joystick control. Each time it is adjusted, a beep will sound. When it is adjusted to the center position, it will make a longer beep. Please pay attention to the

sound. With joysticks centered, use the Trim buttons until the drone is steadily hovering in place.


Calibration of joystick:

The E8 Transmitter is pre-calibrated, but recalibration can help solve some common issues:

1. With the E8 Transmitter turned off, press the "L3-" button and the power button at the same time as the controller turns on.

2. Wait for the center indicator to light up and change from fast flashing to slow flashing, and push the joysticks of E8 Transmitter to the maximum travel in the four directions up, down, left, and right.

3. Press the "L3-" button, the prompt will sound, exit the calibration mode, and the E8 Transmitter will then boot up.

Regarding the Mode change and switching between left and right hand operation instructions.


Package Included:

1 x E8 Radio Transmitter










EMAX E8 2.4GHz 8CH Dual-frequency Left Right Switch Mode2 Radio Transmitter Built-in USB Charge Wired Trainer Interface for EMAX Tinyhawk III RC Drone CODDownload NowView Gallery


,
NameLessRC Spare Parts 66X45X23mm Black Case Protective Box for Naked GOPRO Hero10 Camera FPV Racing Drone Cinewhoop DIY Parts
COD
NameLessRC Spare Parts 66X45X23mm Black Case Protective Box for Naked GOPRO Hero10 Camera FPV Racing Drone Cinewhoop DIY Parts
COD NameLessRC Spare Parts 66X45X23mm Black Case Protective Box for Naked GOPRO Hero10 Camera FPV Racing Drone Cinewhoop DIY Parts
CODNameLessRC Spare Parts 66X45X23mm Black Case Protective Box for Naked GOPRO Hero10 Camera FPV Racing Drone Cinewhoop DIY Parts
COD



Description:

Brand: NameLessRC

Color: Black

Weight: 9g

Size: 66 x 45 x 23mm

ND filter adaptation: Mavic 2 Zoom ND Filter


Note:

This injection mould case is only apply to the NameLessRC BEC module+Naked G9


Package Included:

1x NameLessRC 66X45X23mm Case





NameLessRC Spare Parts 66X45X23mm Black Case Protective Box for Naked GOPRO Hero10 Camera FPV Racing Drone Cinewhoop DIY Parts CODDownload NowView Gallery


,
NameLessRC 2-6S 5V/2.1A BEC Module for GoPro Hero10 Naked Camera FPV Racing Drone Cinewhoop DIY Parts
COD
NameLessRC 2-6S 5V/2.1A BEC Module for GoPro Hero10 Naked Camera FPV Racing Drone Cinewhoop DIY Parts
COD NameLessRC 2-6S 5V/2.1A BEC Module for GoPro Hero10 Naked Camera FPV Racing Drone Cinewhoop DIY Parts
CODNameLessRC 2-6S 5V/2.1A BEC Module for GoPro Hero10 Naked Camera FPV Racing Drone Cinewhoop DIY Parts
COD



Features:

This BEC board designed by the NameLessRC team specifically for GoPro Hero 10. Innovative use of flexible cable connection. No fear of damage to the motherboard during the crash. It supports 2~6S voltage input and 5V/2.1A stable output. The NLRC BEC matched with GoPro Hero 10 motherboard perfectly and easy to install.


Description:

Model:NameLessRC BEC Module for GoPro Hero10

Brand name:NameLessRC

Input:2S~6S

Output:5V/2.1A

Connector:PH1.0-3P connector

Weight:1.5g


Package Included:

1 x BEC module 

1 x Flexible cable 

1 x Control cable





NameLessRC 2-6S 5V/2.1A BEC Module for GoPro Hero10 Naked Camera FPV Racing Drone Cinewhoop DIY Parts CODDownload NowView Gallery


,
Cessna TY9 2.4GHz 2.5CH 340mm Wingspan EPP RC Glider Airplane  LED Strip Light RTF for Trainer Beginner
COD
Cessna TY9 2.4GHz 2.5CH 340mm Wingspan EPP RC Glider Airplane  LED Strip Light RTF for Trainer Beginner
COD Cessna TY9 2.4GHz 2.5CH 340mm Wingspan EPP RC Glider Airplane  LED Strip Light RTF for Trainer Beginner
CODCessna TY9 2.4GHz 2.5CH 340mm Wingspan EPP RC Glider Airplane  LED Strip Light RTF for Trainer Beginner
COD



Specification:

Brand: SHEINGKA

Model: TY9

Wingspan: 340mm 

Length: 260mm 

Color: Grey + Blue

Product size: 34x26x5cm/13.39x10.24x1.97in
Product material: EPP foam + plastic + metal + electronic components
Receiving frequency: 2.4G
Number of channels: 2 channels
Use age: 14+
Battery parameters:
Body battery: 3.7V 300mAh lithium battery (built-in)
Motor model: 716 brushed motor
Charging time: 50 minutes
Remote control distance: 80-120 meters
Charging method: USB cable charging
Remote control mode: Left hand throttle
Single battery flight time: 8-10 minutes
Fast and slow gear: Fast/slow
Remote control battery: 3 X AAA (not included)
Functions: Ascending, descending, turning left and right, gliding, hovering, LED light bar


Features:

1. With cool LED lights for night shooting, dual-powered powerful flight

2.Be made of EPP material, high flexibility, not easy to break.

3.It adopts high efficient pneumatic contour design, ensure good stability, operability and gliding performance.

4.Super strong power configuration.

5.Two-channel design, easier to control, just practice a few times, you can get started.

6.300 mAh large-capacity aircraft battery and replaceable for easy play.

7.Featured with reasonable design of climbing angle, powerful motors, easy to take-offand excellent gliding performance.Equipped with built-in gyroscope to enhance the stability of flight.


Package Included:
1 X TY9 Fixed wing aircraft
1 X Remote Control
2 X Spare propeller
1 X Battery(Optional)
1 X Manual
1 X USB Cable
1 X Screwdriver 





Cessna TY9 2.4GHz 2.5CH 340mm Wingspan EPP RC Glider Airplane LED Strip Light RTF for Trainer Beginner CODDownload NowView Gallery


Follow Us @soratemplates