Aiden Lacey

Overview:

The FT90R is a micro-sized digital servo that has been built by FEETECH (formerly known as Fitec) specifically for continuous rotation. At 6 V, it has a maximum rotation speed of around 170 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great miniature actuator for beginner robotics projects; just throw on a pair of wheels and your robot is ready to roll!

The FT90R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The rest point is set precisely to 1.5 ms with a deadband width of ±20 µs. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases.

The servo has a 10″ (250 mm) lead that is terminated with a JR-style connector and includes additional servo horns and mounting hardware.

Note that, as with most hobby servos, stalling or back-driving this servo can damage it.

If you want to use this servo as an actuator for your miniature robot, you will need a wheel to go with it.

Specifications:

Brand Name: Feetech

Item Name: FT90R

Weight: 9g

Size: 22.9×12.1×26.5 mm

Digital: Yes

Gear Type: Plastic Gear

Limit Angle: 360°

Bearing: No ball bearings

Horn Gear Spline: 20T

Horn Type: Plastic

Case Material: ABS

Connector Wire: 250mm±5mm JR

Operating Voltage: 4.8V-6.0V

Idle Current(at stopped): 5mA-6mA

No-load Speed: 130RPM@6V

Running Current (at no load): 900mA @6V

Peak Stall Torque: 1.5kg.cm@6V

Rated Torque: 0.5kg.cm@6V

Stall Current: 900mA@6V

Rotating Direction: CW (1500~ 1000 μsec), CCW (1500~ 2000 usec)

English Manual, Click Here

1 Piece Version Included:

1x Feetech FT90R Servo

4PCS Version Included:

4x Feetech FT90R Servo

6PCS Version Included:

6x Feetech FT90R Servo

URUAV 3D Printed Battery Power Cable Holder Cable Organizer for DJI FPV Goggle V1/V2 FPV RC Drone

Description:

Brand: URUAV

Item: Cable Organizer

Weight: 6 grams

Suitable for DJI FPV Goggles V1/V2

The power cable holder can prevent the power cable from suddenly loosening during intense flight, causing the goggles to power off.

The power cord organizer can organize the long power cable and is easy to store, and it is convenient to use and no longer messy.

Note: The package includes 2 cable organizers + 1 power cord holder + 1 wrench, and does not include FPV Goggles.

Package included (Not Included FPV Goggles):

2x cable organizer

1x cable holder

1x wrench