Sunday, May 9, 2021

,
iFlight Nazgul5 V2 5 Inch 6S HD LED Version FPV Racing Drone BNF Caddx Nebula Nano SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV
COD
iFlight Nazgul5 V2 5 Inch 6S HD LED Version FPV Racing Drone BNF Caddx Nebula Nano SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV
COD iFlight Nazgul5 V2 5 Inch 6S HD LED Version FPV Racing Drone BNF Caddx Nebula Nano SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV
CODiFlight Nazgul5 V2 5 Inch 6S HD LED Version FPV Racing Drone BNF Caddx Nebula Nano SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV
COD



Introduction:

Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Vista Digital HD System on it. We sticked the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING 2207 with LED light motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Note: R81-SPI Frsky  (Compatible with Frsky ACCST D8)


Description:

Brand: iFlight

Item Name:  Nazgul5 V2 HD FPV Racing Drone

  • SucceX-E F7 45A flight stack
  • XING 2207 FPV Motor with LED light (6S 1800KV)
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 408.5g (without battery)


XL5 V5 Frame
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
SucceX-E F7 Flight controller

- MCU: STM32F22RET6 216MHz

- Gyro: MPU6000

- Baro: DSP310

- OSD: IFLIGHT OSD AT7456E

- BEC: 5V 2.5A

- BlackBox: 16MB

- Uart: 4*UART(UART1UART2UART4UART5)

- UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry

- UART2 for Receiver

- UART4 for Free 

- UART5 for ESC Telemetry

- 4×Dshot/PWM outputs

- Smartaudio & IRC Tramp VTX protocol supported

- WS2812 led Strip: Yes

- Bepper: Yes

- Firmware: IFLIGHT_SUCCEX_E_F7

Outer Size: 36*36mm / 30.5*30.5/φ4 mounting

- Weight: 6.9g

- Mounting hole: 30.5*30.5mmφ4mm

- Size: 36*36mm

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 36*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 15g (without wire)

- Supports 2-6S Lipo input

EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware

- Current sensor: YES

- BEC: NO

Constant: 45A / Burst: 50A

- Supports: DShot150/300/600/MultiShot/OneShot etc.

- Target: G-H-30 BLS 16.7


Features:

- 5mm arm design for more durability

- Easy-Swap arms

LED illuminated Logo

XING 2207 motors with LED light
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks


Additional Suggested Parts (Not Included):

Battery: 6S 1300mAh

Camera Mount for Gopro


Package Included:

  • 1x XL5 V5 Frame
  • 1x Caddx Nebula Nano Digital HD System Kit
  • 1x Albatross LHCP RP-SMA 5.8g Antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


  • Note: Camera Mount for Gopro is not included.



Important

The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.


PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

  To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

  Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"





iFlight Nazgul5 V2 5 Inch 6S HD LED Version FPV Racing Drone BNF Caddx Nebula Nano SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 1800KV CODDownload NowView Gallery


,
iFlight Nazgul5 V2 5 Inch 4S HD LED Version FPV Racing Drone BNF Caddx Nebula Nano SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV
COD
iFlight Nazgul5 V2 5 Inch 4S HD LED Version FPV Racing Drone BNF Caddx Nebula Nano SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV
COD iFlight Nazgul5 V2 5 Inch 4S HD LED Version FPV Racing Drone BNF Caddx Nebula Nano SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV
CODiFlight Nazgul5 V2 5 Inch 4S HD LED Version FPV Racing Drone BNF Caddx Nebula Nano SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV
COD



Introduction:

Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Vista Digital HD System on it. We sticked the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING 2207 with LED light motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Note: R81-SPI Frsky  (Compatible with Frsky ACCST D8)


Description:

Brand: iFlight

Item Name:  Nazgul5 V2 HD FPV Racing Drone

  • SucceX-E F7 45A flight stack
  • XING 2207 FPV Motor with LED light (4S 2450KV)
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 408.5g (without battery)


XL5 V5 Frame
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
SucceX-E F7 Flight controller

- MCU: STM32F22RET6 216MHz

- Gyro: MPU6000

- Baro: DSP310

- OSD: IFLIGHT OSD AT7456E

- BEC: 5V 2.5A

- BlackBox: 16MB

- Uart: 4*UART(UART1UART2UART4UART5)

- UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry

- UART2 for Receiver

- UART4 for Free 

- UART5 for ESC Telemetry

- 4×Dshot/PWM outputs

- Smartaudio & IRC Tramp VTX protocol supported

- WS2812 led Strip: Yes

- Bepper: Yes

- Firmware: IFLIGHT_SUCCEX_E_F7

Outer Size: 36*36mm / 30.5*30.5/φ4 mounting

- Weight: 6.9g

- Mounting hole: 30.5*30.5mmφ4mm

- Size: 36*36mm

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 36*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 15g (without wire)

- Supports 2-6S Lipo input

EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware

- Current sensor: YES

- BEC: NO

Constant: 45A / Burst: 50A

- Supports: DShot150/300/600/MultiShot/OneShot etc.

- Target: G-H-30 BLS 16.7


Features:

- 5mm arm design for more durability

- Easy-Swap arms

LED illuminated Logo

XING 2207 motors with LED light
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks


Additional Suggested Parts (Not Included):

Battery: 4S 1550mAh

Camera Mount for Gopro


Package Included:

  • 1x XL5 V5 Frame
  • 1x Caddx Nebula Nano Digital HD System Kit
  • 1x Albatross LHCP RP-SMA 5.8g Antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


  • Note: Camera Mount for Gopro is not included.



Important

The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.


PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

  To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

  Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"





iFlight Nazgul5 V2 5 Inch 4S HD LED Version FPV Racing Drone BNF Caddx Nebula Nano SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV CODDownload NowView Gallery


Saturday, May 8, 2021

,
iFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV
COD
iFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV
COD iFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV
CODiFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV
COD



Introduction:

Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!


Note: R81-SPI Frsky  (Compatible with Frsky ACCST D8)


Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.


Description:

Brand: iFlight

Item Name: Nazgul5 V2 Analog LED Version FPV Racing Drone

  • SucceX-E F7 45A flight stack
  • XING 2207 with LED Light FPV Motor ( 4S 2750KV)
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 399g (without battery)


Features:

- 5mm arm design for more durability

- Easy-Swap arms

LED illuminated Logo

- XING 2207 motors with LED Light
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks


XL5 V5 Frame
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
SucceX-E F7 Flight controller

- MCU: STM32F22RET6 216MHz

- Gyro: MPU6000

- Baro: DSP310

- OSD: IFLIGHT OSD AT7456E

- BEC: 5V 2.5A

- BlackBox: 16MB

- Uart: 4*UART(UART1UART2UART4UART5)

- UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry

- UART2 for Receiver

- UART4 for Free 

- UART5 for ESC Telemetry

- 4×Dshot/PWM outputs

- Smartaudio & IRC Tramp VTX protocol supported

- WS2812 led Strip: Yes

- Bepper: Yes

- Firmware: IFLIGHT_SUCCEX_E_F7

Outer Size: 36*36mm / 30.5*30.5/φ4 mounting

- Weight: 6.9g

- Mounting hole: 30.5*30.5mmφ4mm

- Size: 36*36mm

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 36*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 15g (without wire)

- Supports 2-6S Lipo input

EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware

- Current sensor: YES

- BEC: NO

Constant: 45A / Burst: 50A

- Supports: DShot150/300/600/MultiShot/OneShot etc.

- Target: G-H-30 BLS 16.7

SucceX Force 5.8g 800mW VTX Adjustable

- Item: SucceX-Force 800mW adjustable VTX

- Input voltage:5V

- Output voltage/ Max current: 5V 1A

- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@400mW, 380mA@800mW

- Output 48 frequency points, 

- PIT/25mW/200mW/400mW/800mW

- The output power is stable;

- Frequency lock fast, the boot does not interfere with companions;

- Built-in output power self-check function;

- Full format video format: NTSC /PAL;

- Wide input voltage range. low power consumption:

  7V~36V,+12V/380mA@800mW;

- Small size:36*36*3mm

- Mounting holes 4-M3

- Lightweight: 7.2g(excluding antenna)


Additional Suggested Parts (Not Included):

Battery: 4S 1550mAh

Camera Mount for Gopro


Package Included:

1 x XL5 V5 Frame

1 x Caddx Ratel, 2.1mm lens camera

1 x Albatross RHCP SMA 5.8g antenna

2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)

1 x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)

1 x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


Note: Camera Mount for Gopro is not included.



PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"





iFlight Nazgul5 V2 5 Inch 4S Analog LED Version FPV Racing Drone BNF Caddx Ratel Cam 800mW VTX SucceX-E F4 Flight Controller 45A BLHeli_S ESC XING 2207 2450KV CODDownload NowView Gallery


Follow Us @soratemplates